Author Topic: Concorde headlight  (Read 887 times)

Offline Serniter

  • Auto Obsessed
  • ***
  • Location: New Jersey
  • Posts: 793
  • Carma: +0/-0
  • Gender: Male
    • View Profile
Concorde headlight
« on: June 04, 2005, 07:52:23 am »
This is probably not a difficult task, but I have a friend who is stuck, and is asking if I know how to replace the headlight bulb on a Chrysler Concorde. Thanks in advance!
Bats always turn left when exiting a cave.

Offline barrie1

  • Car Crazy
  • *****
  • Location: London Ont Canada
  • Posts: 14832
  • Carma: +0/-0
  • Gender: Male
    • View Profile
Concorde headlight
« Reply #1 on: June 04, 2005, 03:13:08 pm »
I would suspect the moulding around the headlight is removable and you then remove it and then the bulb. Tell him to use gloves when handling the new bulb as the oil from his hands will shorten the life of the new bulb. I don't believe this is a difficult task to do.

Offline ericthejet

  • Auto Obsessed
  • ***
  • Location: Ottawa
  • Posts: 770
  • Carma: +0/-0
    • View Profile
Concorde headlight
« Reply #2 on: June 04, 2005, 07:33:34 pm »
If it's a small bulb that fits into your hand you change it from behind the lens.  Unplug the old one, quarter turn left or right will allow removal of the old bulb.  Re-install the new one, don't touch the bulb if yoiu can help it.  Read the instructions on the bulb package.  Would not hurt to apply a bit of dielectric grease (tune-up section at CTC) top the prongs.
I miss my motorcycle!