August 27, 2002

TRW unveils first camera-based occupant detector

Livonia, Michigan – TRW, a major U.S. auto parts supplier, has announced that it is developing an interior vision system with the capability to accurately sense occupant size and position and deliver real-time reactions to protect passengers.

“A number of companies, including TRW, are developing indirect sensing systems primarily based on weight sensors to not only determine the size of the passenger, but to try and predict if and when these passengers are considered out-of-position, meaning that a portion of their body is so near to the airbag that it can cause injury. This is particularly significant when children or small stature adults have their heads near the airbag when it deploys,” said Doug Campbell, vice president, Occupant Safety Systems, TRW Automotive.

Campbell said TRW’s new vision system, slated for introduction in the 2007 model year, is a better solution to occupant sensing and passenger protection.

“The vision system is a direct measurement method that relies on real-time accurate data to determine the proper deployment of interior safety systems,” Campbell explains. “For example, the vision system is designed to ‘see’ if there is a rear-facing infant child seat in the passenger seat and will automatically prevent the deployment of the airbag, and can also determine if the occupant is a child under six or a greater than 5th percentile small stature female and prevent or adjust the severity of airbag deployment according to the situation.”

The system uses a tiny, highly accurate stereo camera system mounted in the overhead console facing back into the vehicle cockpit. The camera circumference is roughly the size of a dime and about 1 inch long, and a stereo video mode was chosen because it allows for data to be triangulated to pinpoint the position of the occupant. This is very important because this information determines if the occupant is considered in the “keep out” zone where airbag deployment is prevented.

“The system is also very competitive from an economic standpoint, because it does not rely on the proliferation of electronic weight sensors, belt tension sensors, seat position indicators and similar items that current systems utilize. The camera itself is the primary means of occupant sensing and data gathering and it produces a far more reliable picture of what is really happening inside the vehicle,” said Campbell.

Connect with